PLC Technology

TOPAZ CI6P-Pr Interface Converter

The module is designed for converting physical levels of RS-232 TTL, UART, CAN, USB, and Ethernet logical signals into physical levels of the RS-485 interface logical signals, and vice versa. The module is used for digital information exchange via the RS485/CAN bus.
  • Specifications

Specifications

Feature Value
Data interface parameters
Interfaces RS485/CAN, RS232, RS422, UART, USB, Ethernet
USB
Interface standard USB 2.0
Length of communication link with external device Up to 3 m
Baud rate Up to 115,200 bit/s
RS-485
Interface standard TIA/EIA-485
Length of communication link with external device 1200 m max
Number of connected devices Up to 32
RS-232
Input voltage range ±5…15 V
Output voltage range ±9…11 V
Length of communication link with external device up to 10 m
Baud rate Up to 115,200 bit/s
UART
Length of communication link with external device up to 0.3 m
Number of connected devices 1
Hot start allowed
CAN
Interface standard CAN 2.0
Length of communication link with external device up to 1000 m
Network topology bus
Ethernet
Connector type RJ45
transfer rate 10 Mbit/s
Number of connected devices Up to 10
Maximum signal transfer range 100 m
Mains specifications
Power channels 2
Rated supply voltage, V 24 (DC)
Operating supply voltage range, V 15 ÷ 30
Current consumption (at 24 V), mA 40
Design
Mounting type DIN rail 35 mm
Case material plastic
Case protection class IР20
Module dimensions (width х height х depth), mm 22.5 x 99 x 117
Weight, kg 0,5
Reliability performance
Mean time between failures, h 140000
Average time to restore operability at the operation facility (excluding the time of personnel arrival and if spare parts are available), min, max. 30
Average service life, years 30
Operating environment:
Ambient air temperature, 0С -40 to +70
Average humidity (non-condensing), % 5 ÷ 95 at 30 °C
Air pressure, kPa 60 ÷ 106.7
Back to TOP